TIP: To prepare for installation, locate and take note of the 5-digit ID number found on the back of the camera. You will need this when finalizing installation.
- To mount the camera, first mount the quick connect bracket to the pole with two band clamps. Remove the bolts from the quick connect bracket and slide the universal mount on the bracket with the knuckle facing up.
- Connect your camera to the universal mount. You may need to swivel the knuckle to face the direction of your jobsite.
- Using a compass, bandclamp the solar bracket to a pole facing south. There are locational stickers to ensure it is facing the correct direction.
- Slide the solar system on the bracket and be sure it is settled into its secure location.
- Twist the pin pops into place on the underside of the battery box, then insert the locking pin on the side of the bracket.
- Connect the 5 pin connector of the power cord to the camera and the 4 pin connector to the solar system.
- Switch the power knob to “Internal Solar Power”. Check that the blue light on the camera illuminates.
- To confirm installation is complete, contact your dedicated client support manager at 888-849-2583 (M-F 9 a.m. - 5 p.m. EST) and provide them with the 5-digit ID number found on the back of the camera.